Basic Info.
Type
Autoclaved Aerated Concrete
Strength Grade(Mpa)
B06A5.0
Mineral Composition
Cement, Lime, Fly Ash (or Silica Sand)
Hardening Feature
B06A5.0
Technique
Steaming Process
Fire Resistance
Not Less Than 4 Hour(Panel Wall Thickness:100mm)
Strength After Freezing
Not Less Than 4.0 MPa
Drying Shrinkage
Not Higher Than 0.5 mm/M
Compressive Strength
A5.0 MPa/ Cubic Meter
Quality Loss
Not Higher Than 5.0%
Average Sound Insulation
40.8 dB
Trademark
Ecotrend materials
Transport Package
Wooden Pallet
Specification
3750*600*150 mm
Product Description
German Production Techniques Building Materials Autoclaved Aerated Concrete Panel for Green Building Product Description
Ecotrend AAC Roof Panels are load-bearing reinforced products used in social and commercial construction.In most structures, a significant amount of energy is lost through the roof, but Ecotrend AAC roof panels reduce the amount of thermal transmission. Roof panels are reinforced units used to build roof and floor slabs that work simply supported by walls,and also by steel,concrete or wood structures.Autoclaved aerated concrete (shorted as AAC) is a kind of lightweight precast concrete, it was invented in the mid-1920s and has developed for around 100 years. Since 1980, the production of AAC Blocks continues to increase globally and it is increasingly used by developers, architects, builders around the world, especially for prefabricated building, this is in line with the development trend of the construction industry.
Distinctive Advantages:
(1) Lightweight:
The dry density of Ecotrend AAC products is generally 400~700kg/m³, which is equivalent to one-third of clay bricks and one-fourth of concrete, meanwhile it is also lower than general lightweight aggregate concrete, if Ecotrend AAC products is used , transportation costs, energy and labor costs could be saved.
(2) High strength:
Ecotrend AAC products have high dimensional accuracy. If thin-layer mortar is used for masonry, the strength utilization factor is greatly improved. The strength of masonry is about 80% of the strength of the Panel itself, which is 30% stronger than that of clay bricks. In addition, steel bars can be configured according to design requirements in order to meet different needs. Ecotrend AAC roof panel is widely use as building roof insulation layer.
Product Parameters
Specification (mm) | Shape | Compressive Strength(MPa/m³) | Average Density(kg/m³) |
With Groove | Flat | Average Value | Min Value |
| <2000x600x75 | √ | | ≥5.0 | ≥4.0 | ≤625 |
| <3000x600x100 | √ | | ≥5.0 | ≥4.0 | ≤625 |
| <3500x600x125 | √ | | ≥5.0 | ≥4.0 | ≤625 |
| <4200x600x150 | √ | | ≥5.0 | ≥4.0 | ≤625 |
| <4800x600x200 | √ | | ≥5.0 | ≥4.0 | ≤625 |
Main Performance Index:
Performance | B04 Grade | B05 Grade | B06 Grade |
Dry Density(kg/m³) | ≤425 | ≤525 | ≤625 |
Compressive Strength(Mpa/m³) | A2.5 | A3.5 | A5.0 |
Dry Value | Thermal Conductivity | 0.11 | 0.13 | 0.15 |
Drying Shrinkage(mm/m) | ≤0.5 |
Freezing Resistance | Quality Loss(%) | ≤3.0 | ≤3.0 | ≤5.0 |
Strength after Freezing(Mpa) | ≥2.0 | ≥3.2 | ≥4.0 |
Softening Factor | 0.88 |
Penetration Resistance | 88.3 |
Fire Resistance( Hour) | ≥ 4 hour(Panel Wall Thickness:100mm) |
Average Sound Insulation(dB) | 40.8(Panel thickness:100mm, with double sides putty) |
Size Deviation(mm) | Length±2, Width±1, Thickness±1 |
Common Mm | Wide 600 ,Thick 75,100,120,150,200 |
Thickness/mm | 75 | 100 | 125 | 150 | 175 | 200 |
Intensity of Pressure(N/m2) | Maximal Length (mm) |
800 | 2000 | 3000 | 3500 | 4200 | 4800 | 5200 |
1000 | 2000 | 3000 | 3500 | 4200 | 4800 | 5200 |
1200 | 1960 | 2920 | 3400 | 4080 | 4640 | 5200 |
1400 | 1920 | 2840 | 3300 | 3960 | 4480 | 5200 |
1600 | 1880 | 2760 | 3200 | 3840 | 4320 | 4950 |
1800 | 1840 | 2680 | 3100 | 3720 | 4160 | 4900 |
2000 | 1800 | 2600 | 3000 | 3600 | 4000 | 4800 |
2200 | ------ | 2500 | 2850 | 3350 | 3750 | 4700 |
Product Process
Ecotrend manufactures autoclaved aerated concrete (AAC) or aerated lightweight concrete (ALC) block and panel, it is a composite of cement, lime, and silica sand. Besides, ALC panel uses bidirectional welded steel mesh (reinforcing bar) ,which has been treated with a superior rust preventive liquid and cured with high-temperature, high-pressure steam. A porous silicate board is manufactured for high performance of anti-permeability and sound insulation. It can be divided into external wall panels, partition panels (internal wall panels), floor panels and roof slabs according to the purpose.
Company Profile
Here are the Certificate we gained.
Packaging & Shipping
Ecotrend is located at Sihanouk Ville Special Economic Zone, Cambodia. The company occupies land area of about 25000 square meters; and total investment of more than 14 million dollars. Ecotrend has introduced world's advanced aerated concrete production line to produce AAC blocks and ALC panels (ALC panel belongs to prefabricated building materials). The company has annual production capacity of 400,000 cubic meters, which is the largest and only ALC panel manufacturing enterprise with green prefabricated building material in Cambodia. Since it only about 20-minutes driving from Sihanouk Ville Port, thus, Ecotrend is endowed with unique geographical advantage for exporting. Installation Instructions
Our Advantages
1). We has annual production capacity of 400,000 cubic meters,which is the leading manufactuer in Southeast Asia.
2). Convenient Transportaion: our factory is close to Sihanouk Ville Port,which only about 20-minutes driving from the port.
3). Advanced Production Technology: we has introduced world's Full-Automatic Production Lines to produce AAC blocks and ALC panels (ALC panel belongs to prefabricated building materials).
4). Our mission: to deliver AAC products for your projects that will meet your requirements,in terms of quality ,quantity ,specifications,technical and at a competitive price.
FAQ
1). Are you trading company or Manufacturer?
We are manufacturer, Ecotrend Materials is our factory established in Cambodia. And HuaFei Express is our Marketing Center located in China.
2). Who will we sign contract with?
Normally with Ecotrend for AAC/ALC products and the shipment will be made directly from Cambodia. If you'd like to buy the accessories of ALC products, you will sign contract with Huafei Express.
3). Which port will you export your products?
For AAC/ALC products, we will export from Sihanouk Ville Port, Cambodia; for accessories or other related products, we will export from Shanghai or Ningbo Port, China.
4).What is your lead time?
Usually within about 15-20 days after receiving your deposit or L/C.
5).What is your payment terms?
50% deposit by T/T advance and 50% balance by T/T before loading; L/C is accepted as well.
6).What is the package for the product?
By wooden pallet(Non fumigation pallet),or comer protectors on all sides, outer with polybay. Or as buyers' requirements for Wholesale Concrete Blocks.
Address:
Room 1101, Jincheng Road, Xiaoshan District, Hangzhou City
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Ecotrend (Cambodia) New Building Material Development Co., Ltd. Is a Chinese-invested enterprise established in the Kingdom of Cambodia, specializing in the development, manufacture, and export of eco-friendly, energy-efficient new building materials --- autoclaved aerated concrete (autoclaved lightweight concrete) products (known as AAC or ALC products).
Ecotrend is located at Sihanouk Ville Special Economic Zone, Cambodia, and its marketing center is in Hangzhou, China. The factory covers an area of about 25000 square meters, and total investment of more than 14 million dollars. It has introduced the world′s advanced aerated concrete production line to produce AAC blocks and ALC panels. The factory has annual production capacity of 400, 000 cubic meters, which is the largest and only ALC panel manufacturing enterprise with green prefabricated building material in
Cambodia.
Since it is only about 20-minutes driving from Sihanouk Ville Port, Ecotrend is endowed with a unique geographical advantage for exporting. If you are interested in our products, please feel free to contact us. And we are here cordially welcome you to visit our site.
