Basic Info.
Type
Autoclaved Aerated Concrete
Mineral Composition
Cement, Lime, Fly Ash (or Silica Sand)
Technique
Steaming Process
Product Name
Ecotrend AAC External Wall Blocks
Compressive Strength
A3.5 MPa/ Cubic Meter
Thermal Conductivity
0.12 W/M*K
Quality Loss
Not Higher Than 3%
Dry Density
Not Higher Than 525 Kilogram/Meter
Drying Shrinkage
0.3 mm/M
Strength After Freezing
Not Less Than 3.0 MPa
Fire Resistance
4 Hours( Block Wall Thickness:100mm)
Penetration Resistance
88.3
Average Sound Insulation
40.8 dB
Feature
Waterproof, Heat Insulation, High Strength
Trademark
Ecotrend Materials
Transport Package
Wooden Pallet (Non Fumigation Pallet)
Specification
600*100*200mm
Product Description
Product Description
Ecotrend Environmental Protection Building Material AAC Concrete Blocks Price In Thailand
Product Name: Ecotrend AAC External Wall Blocks
Brand Name: Ecotrend
Product Introduction:
Ecotrend AAC internal wall blocks is a product which is designed as building internal wall material.
We designed internal wall blocks of different thickness, including 100mm, 120mm, 150mm, 200mm, 240mm, 250mm, 300mm, different thickness could meet different architectural design requirements.
Ecotrend AAC internal wall block has good performance on thermal insulation, sound insulation, fire resistance, moisture-proof, meanwhile, it is a non-toxic product, even it is at high temperature, no harmful gases is produced.
Prefabricated building is the development trend of building industry, AAC internal wall block is now widely applied as internal wall material of prefabricated buildings. Distinctive Advantages:
- Thermal Insulation: improved thermal efficiency reduces the heating and cooling load in buildings, and saving on energy cost.
- Fireproof: porous structure gives superior fire resistance, 100mm thick panel has 4 hours of fire rating, recognized as Euroclass A1 non-combustible product.
- Sound Insulation: inside of AAC/ALC, there are plenty of pores, so that it has effective sound insulation. The noise can be reduced by 30 - 50 dB depending on its thickness.
- Lightweight and high strength: the density of AAC/ALC is 1/5 of common concrete, 1/3 of clay brick, similar to wood. In addition, the compressive strength of AAC Product up to 5.0 M/Pa.
- Anti-seimic: lightweight and excellent integrity makes it able to absorb strong impacts, which reduced inertia force during the earthquake.
- Anti-permeability: there are millions of closed pores on the surface; which effectively prevent moisture infiltration.
- Eco-friendly: it produces at least 30% less solid waste than traditional concrete and there is a decrease of 50% of greenhouse gas emissions.
- Non-toxic: there are no toxic gases or other toxic substances in autoclaved aerated concrete. It neither attracts rodents or other pests nor can it be damaged by such.
- Long lasting: it is not affected by harsh climates or extreme weather changes. It will not degrade under normal climate changes.
- Convenient Construction: customized size helps install faster and easier; construction speed is 4 times of traditional block.
Product Pictures: Product Specification:Specification(mm) | Compressive Strength(MPa/m³) | Average Density(kg/m³) |
Average Value | Min Value |
600*150*200 | ≥5.0 | ≥4.0 | ≤625(725) |
600*200*200 | ≥5.0 | ≥4.0 | ≤625(725) |
600*240*200 | ≥5.0 | ≥4.0 | ≤625(725) |
600*250*200 | ≥5.0 | ≥4.0 | ≤625(725) |
600*300*200 | ≥5.0 | ≥4.0 | ≤625(725) |
Performance | *B04 Grade | *B05 Grade | *B06 Grade |
Dry Density(kg/m³) | ≤425 | ≤525 | ≤625 |
Compressive Strength(Mpa/m³) | A2.0 | A3.5 | A5.0 |
Thermal Conductivity(W/(m*K) | 0.09 | 0.12 | 0.132 |
Drying Shrinkage(mm/m) | 0.3 | 0.3 | 0.32 |
Freezing Resistance | Quality Loss(%) | ≤3 | ≤3 | 2.1 |
Strength after Freezing(Mpa) | ≥2.0 | ≥3.0 | 4.4 |
Softening Factor | 0.88 |
Penetration Resistance | 88.3 |
Fire Resistance( Hour) | 4hour( Block Wall Thickness:100mm) |
Average Sound Insulation(dB) | 40.8(Block thickness:100mm, with double sides putty) |
Size Deviation(mm) | Length±2, Width±1, Thickness±1 |
Product Recommendation
AAC/ALC Wall Panel AAC/ALC Thermal Insulation Block
Strict Production Process
Process Flow :
Production of Reinforcing Mesh > Anti-rust Treatment of Reinforcing Mesh > Mixing > Pouring > Insert Reinforcing Mesh > Precuring > Cutting > Autoclved Curing > Packing > Transportation
Product Installation
Ecotrend has a professional engineering team with extensive knowledge of exterior and interior materials, external structures and other building materials. We can offer ALC installation guidance services on line as part of construction projects for large buildings and commercial facilities.
We can also offer in-house installation management services that cater effectively to a wide range of on-site needs and ensure safety and quality.
Application
The ACC/ALC Products could be used in industry buildings and residential buildings. Now, they are welcomed by more and more customers,they are widely used in various projects,such as commercial, warehouse and railway etc.
The product has the characteristics of convenient installation, wide application range, and high construction accuracy; meanwhile, it can greatly improve the usage performance of the building, and reduce the cost of construction.
*Railway: Acoustic board along railway. *Hospital: Partition wall, Exterior wall, Roof surface, etc.
*Hotel: Partition wall, Exterior wall, Roof surface, etc.*Library: Partition wall, Exterior wall, Roof surface, etc.*Apartment: Partition wall, Exterior wall, Roof surface, Floor board, Insulation board, etc.*High-rise building: Partition wall, Exterior wall, Roof surface, Floor board, Insulation board, etc.*Villa: Partition wall, Exterior wall, Roof surface, Floor board, Insulation board, etc.*Warehouse: Extemal walls, Firewalls, Roof surfaces, Fences, etc.*Logistics center, Factory building, etc.: Extemal walls, Firewalls, Roof surfaces, Fences, etc.Company Profile
Huafei Express is our Marketing Center in China, and our factory is named as Ecotrend Materials established in Cambodia, specializing in the development, manufacture and export of autoclaved aerated concrete (autoclaved lightweight concrete) products (known as AAC or ALC products).
Ecotrend is located at Sihanouk Ville Special Economic Zone, Cambodia, it occupies land area of about 25000 square meters and total investment of more than 14 million dollars. It has annual production capacity of 400,000 cubic meters, which is the largest and only ALC panel manufacturing enterprise with green prefabricated building material in Cambodia.
Our factory:
Why Choose Us?
1). We has annual production capacity of 400,000 cubic meters,which is the leading manufactuer in Southeast Asia.
2). Convenient Transportaion: our factory is close to Sihanouk Ville Port,which only about 20-minutes driving from the port.
3). Advanced Production Technology: we has introduced world's advanced full-automatic production lines to produce AAC blocks and ALC panels (ALC panel belongs to prefabricated building materials).
4). Our mission: to deliver AAC products for your projects that will meet your requirements,in terms of quality ,quantity ,specifications,technical and at a competitive price.
Packaging & Shipping
FAQ
1). Are you trading company or Manufacturer?
We are manufacturer, Ecotrend Materials is our factory established in Cambodia. And HuaFei Express is our Marketing Center located in China.
2). Who will we sign contract with?
Normally with Ecotrend for AAC/ALC products and the shipment will be made directly from Cambodia. If you'd like to buy the accessories of ALC products, you will sign contract with Huafei Express.
3). Which port will you export your products?
For AAC/ALC products, we will export from Sihanouk Ville Port, Cambodia; for accessories or other related products, we will export from Shanghai or Ningbo Port, China.
4).What is your lead time?
Usually within about 15-20 days after receiving your deposit or L/C.
5).What is your payment terms?
50% deposit by T/T advance and 50% balance by T/T before loading; L/C is accepted as well.
6).What is the package for the product?
By wooden pallet(Non fumigation pallet),or comer protectors on all sides, outer with polybay. Or as buyers' requirements for Wholesale Concrete Blocks.
________________________________________________________________________________________________________________________________________
*If you are interested in our products, please feel free to contact us!!
Address:
Room 1101, Jincheng Road, Xiaoshan District, Hangzhou City
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Ecotrend (Cambodia) New Building Material Development Co., Ltd. Is a Chinese-invested enterprise established in the Kingdom of Cambodia, specializing in the development, manufacture, and export of eco-friendly, energy-efficient new building materials --- autoclaved aerated concrete (autoclaved lightweight concrete) products (known as AAC or ALC products).
Ecotrend is located at Sihanouk Ville Special Economic Zone, Cambodia, and its marketing center is in Hangzhou, China. The factory covers an area of about 25000 square meters, and total investment of more than 14 million dollars. It has introduced the world′s advanced aerated concrete production line to produce AAC blocks and ALC panels. The factory has annual production capacity of 400, 000 cubic meters, which is the largest and only ALC panel manufacturing enterprise with green prefabricated building material in
Cambodia.
Since it is only about 20-minutes driving from Sihanouk Ville Port, Ecotrend is endowed with a unique geographical advantage for exporting. If you are interested in our products, please feel free to contact us. And we are here cordially welcome you to visit our site.
